Cause of error code Er:10

Flame has Extinguished 8 (Eight) Times

Solution for error code Er:10

Press the Power button to clear the Error Code.
If Error happens again:

- Monitor the gas pressure to the appliance while in operation. Ensure pressure is between 3.5 and 14” WC.

- Check gas valve wire. Ensure connection is secure.

-Check flame detection sensor. Ensure connections are secure. Normal operating settings are more than 2.5DC before ignition, less than 2.5DC after ignition.

- Check vent terminations. Ensure there are no blockages.

- Assure that the flame is stable when lit.

- If the problem persists, replace the main control.