Cause of error code TRAY 1 TYPE = [xxxx]

The printer has received a job under the three following conditions: - The media type requested by the job is not available in the printer. - Tray 1 has been set for CASSETTE. - Media has been placed in tray 1 (thus triggering tray 1’s paper sensor). If you do not press any buttons, the message disappears in about one minute).

Solution for error code TRAY 1 TYPE = [xxxx]

You can take either of the following actions: 1. Press SELECT to accept the paper type. 2. Press -VALUE+ to change the type and then press SELECT to select the new type. Note Changing the type here changes the default for tray 1 media type in the paper-handling menu. If you do not do anything during the time-out period (about one minute), the printer will print on the media in tray 1.